Seryi A Unifying Physics of Accelerators, Lasers and Plasma 2ed 2023 | 22.32 MB
N/A | 450 Pages
Title: Unifying Physics of Accelerators, Lasers and Plasma: Second Edition
Author: N/A
Year: N/A
Description:
Feature * Model:NRF24L01;
* nRF24L01 is a single chip radio transceiver for the world wide 2.4 - 2.5 GHz ISM band.
* The transceiver consists of a fully integrated frequency synthesizer, a power amplifier, a crystal oscillator, a demodulator, modulator and
Enhanced ShockBurst? protocol engine.
* Output power, frequency channels, and protocol setup are easily.
* programmable through a SPI interface. Current consumption is very low, only 9.0mA at an output power of -6dBm and 12.3mA in RX mode.
* Built-in Power Down and Standby modes makes power saving easily realizable.
* Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control
Applications:
* 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs.
* Built-in hardware CRC error detection, multipoint communication address control.
* Low-power 1.9 ~ 3.6V, only 1uA on Power down mode.
* Built-in 2.4Ghz antenna.
* Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers,
Software programming is very convenient.
* Support 6 Data channels of data reception.
* Standard DIP Pitch Interface for embedded applications.
Product Contents: 12*Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New
DOWNLOAD:
Feature * Model:NRF24L01;
* nRF24L01 is a single chip radio transceiver for the world wide 2.4 - 2.5 GHz ISM band.
* The transceiver consists of a fully integrated frequency synthesizer, a power amplifier, a crystal oscillator, a demodulator, modulator and
Enhanced ShockBurst? protocol engine.
* Output power, frequency channels, and protocol setup are easily.
* programmable through a SPI interface. Current consumption is very low, only 9.0mA at an output power of -6dBm and 12.3mA in RX mode.
* Built-in Power Down and Standby modes makes power saving easily realizable.
* Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control
Applications:
* 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs.
* Built-in hardware CRC error detection, multipoint communication address control.
* Low-power 1.9 ~ 3.6V, only 1uA on Power down mode.
* Built-in 2.4Ghz antenna.
* Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers,
Software programming is very convenient.
* Support 6 Data channels of data reception.
* Standard DIP Pitch Interface for embedded applications.
Product Contents: 12*Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New
DOWNLOAD:
Code:
Code: